Silicone, the trick used by bricklayers to apply it perfectly, for interior finishing and more, revealed.Applying silicone – imilanesi.nanopress.it
Silicone, the trick used by bricklayers to apply it perfectly has been revealed. Silicone is a material that has been used for years in various fields, from industry to production. It is a type of material used to seal, protect doors and windows, glue and protect mirrors, glass, floors and showers. However, the trick used by bricklayers to apply it perfectly has been revealed in recent times.silicone-imilanesi.nanopress.it
Silicone, what kind of material is it?
It is an inorganic polymer and there are many types on the market. Among these are the universal acetin silicone, the universal acrylic silicone and the neutral silicone. In any case, it is a material considered indispensable for use for interior finishes and much more. Not everyone can spread silicone perfectly, and consequently the results will not always be top notch.
As we have already anticipated , the type of silicone is not all the same, but there are different types. For example, there is neutral silicone which differs from acetic silicone precisely because of its cross-linking.
Neutral silicone is more suitable for particular surfaces, such as mirrors for example.
In this case the acetic silicone could compromise the glass and therefore the result would not be satisfactory, but rather would call into question the nature of the object to be treated.
How to spread silicone, the bricklayers’ trick
Silicone, the bricklayers’ trick -imilanesi.nanopress.it
Silicone is used for interior finishes and much more. However, there are some tricks to spread it well, obtaining amazing results. Here’s how to spread silicone correctly, a trick that is used by bricklayers.
Take the original tip of your silicone and put it in the tube. Then take the special gun for silicone and on a surface make a horizontal line, thus spreading the product.
Remove the cap from this and use a cutter to cut off the very end of a tip. After cutting the end, use this new opening to apply another line of product, which will be thicker than the previous one. Cut the original silicone tip diagonally and make another line. The application of the product must always be uniform and quite simple.
Now let’s move on to spreading the product. If you have to fix or glue something and you apply silicone, you know that you usually use your finger to spread it. This is true, but what not everyone knows is that before passing your finger over the silicone you should spray a little degreaser.
This way everything will be well cleaned and the excess product will remain on your site and not on the surface. In this way, using the degreaser first, the product will be removed perfectly.
Another trick . Take some painter’s tape, and between the two strips of tape put the silicone. Spray your finger with soapy water and pass it right over the silicone, then remove the tape.
Even in this case the silicone will be positioned perfectly, without any smudges.
Another trick is the following. Take a bit of rough paper, pass the tip of the silicone over it and pass it over the surface you are interested in.
Now you know the secret of how to use silicone perfectly.