Using ordinary razors and old flip-flops, you can make a cute little jar to keep in your home, garden or balcony. Razor blades and flip flops – imilanesi.nanopress.it
Many times around the house we find broken or worn objects that we think are no longer useful and that for this reason, precisely to avoid accumulating useless objects and consequently to make space, we decide to throw in the garbage. In reality, however, many do not know that these very objects could easily be reused for new incredible creations. In this regard, here below we will reveal what to do using worn razors and old slippers .
What to do with old slippers and used razors
In all homes there are worn or semi-worn objects which for this reason are usually eliminated without even a minute’s thought. But in reality very often we don’t think about the fact that by using them new particular objects could be created to be placed in various environments also to beautify your home. All this is part of that particular type of art defined as DIY and increasingly popular today among young people but also among adults.
We recently proposed an original recycling idea, but this time, it is an even more surprising one.
But what exactly is it? First of all, you will need to take the razors and a small piece of sandpaper, sometimes called sandpaper. The razor blades will be rubbed right over this piece of paper in order to eliminate any residue.
After doing this all you need to do is take a pair of old slippers, and specifically rubber flip flops. And using a small blade cut and then consequently eliminate the plastic part.Flip-flops and razors – imilanesi.nanopress.it
The steps to follow
Making a small jar with worn razors and old slippers will not be complicated at all, on the contrary it will be very simple. After having done what was said above, it will be possible to continue by taking a pen and drawing an inverted triangle right in the center of the slipper. To do this, an excellent solution could be to use one of the razors mentioned above to take into consideration for the measurement.
The drawn triangle will then be cut out using a small blade. And once the piece has been removed from the slipper, the sides will need to be defined well by rubbing everything on the piece of sandpaper used previously. Only when all the sides are well sanded will it be possible to continue adding the hot glue.
This must first be positioned on one side and a razor glued on top of this. And then gradually you will need to add glue to the two remaining sides and add the remaining razors on top of each of these.
In the end what you will get is a small triangle with three feet made using three razors. At this point how to proceed? Simple, you will need to take a medium-sized plastic jar. For example, a hair cream jar and using a blade remove the upper part, which is usually used to close the cap.
Here’s how to proceed
Plant pot made with razor – imilanesi.nanopress.it
After having done this, how should we move forward? The answer is very simple. You will need to take the hot glue gun and pour a little of this glue into the upper part of the triangle previously made with the old slippers . And again, glue the plastic jar on top of this, obviously using the bottom.
At this point your jar will finally be almost ready to be used. In fact, all you have to do is take a spray can of the color you prefer, for example red or green or yellow, and spray it over all the previously assembled objects. What will emerge will be a beautiful and very nice vase to use for your balcony or to place on a shelf inside the house to bring a bit of colour.
Right inside this vase, whoever wants can decide to plant a real plant or place a fake plant inside. In any case, it will surely be able to bring a bit of color into your home.