The water pressure in the house has certain importance in our daily life. It is quite unpleasant to turn on the taps or shower to use the water and find that the pressure is quite low.
Also read:
- These are the most beautiful colored flowers of this season: the ranking
- Cleaning blinds: here is the trick to clean them quickly
- If you see lizards on the walls of your house, this is what you should do
Increase water pressure
Before looking for possible solutions on how to increase the water pressure at home, we must first check if the pressure affects all the faucets, including those in the bathroom, shower, bathtub, bidet, kitchen, etc… or if the problem only affects someone. of these.
Then you have to make sure if it is only necessary to increase the pressure of the cold water or also the hot water .
If, for example, it was only the hot water that had pressure problems, it is most likely a malfunction of the water heater or boiler.
If, on the other hand, the problem is only with one of the faucets, the solution could be to clean the final part of the faucet body: the dispenser. This must be free of lime that forms continuously.
Clean the dispenser and faucet.
The best way to clean the dispenser is to soak it in water and white wine vinegar for at least three hours. This time will be enough for the lime to dissolve completely, but if cleaning does not work then the best thing to do would be to buy a new dispenser. Don’t worry, of all the faucet parts , this is the one that costs the least.
Once the regulator is removed, the water pressure should increase. If this does not occur, the problem may then depend on the faucet or the plumbing system . But it would be important to take it apart and inspect it to see if there is any obvious damage.
The faucet should be cleaned by replacing gaskets and other parts that are broken or damaged. If you are not familiar with this type of procedure, since it is a more complex step, perhaps it would be the case of the intervention of a professional plumber .
Check the hydraulic valve
Let’s move on to the toilets. To increase the pressure, you must first check the condition of the hydrovalve, as this may be the cause of the pressure reduction. So let’s check if there is any water leakage from the underground pipes , or from the walls, etc. It is to make it clear if there is a leak because it has probably already generated a moisture stain, but if it is still hidden, it is better to call a plumber to inspect the pipes.
To recognize the hydrovalve you should know that it is bell-shaped, and its purpose is to reduce the water supply to a safe level for the home. It is located in the pipe connected to the aqueduct or the main pipes of the building’s water system.
When you locate the hydraulic valve, simply turn the regulator clockwise to increase the water pressure. If this pressure increase operation does not solve the problem, it is possible that the hydrovalve itself is broken and, therefore, must be replaced with a new one.
Increase the hot water pressure in your home
Let’s move on to hot water pressure . What do we do if it doesn’t meet our expectations?
To increase hot water pressure, when the problem comes from a broken water pump, you should seek the intervention of a professional in the sector.
As for the water heater, we need to see if the problem comes from blocked pipes or the hot water tank itself.
If we only have the problem in one room, like the bathroom, we simply clean the spout and faucet. However, if the problem also extends to other rooms, we must clean the water heater resistance to remove the limescale that blocks the hot water outlet.
For proper cleaning of the affected parts, and therefore descaling, it would be better to request the experience of a professional. Descaling is a very delicate operation.