To sew a roller blind, just follow these simple instructions: you don’t need to spend money to buy a new one.Sewing a curtain – Imilanesi.Nanopress.it
To enrich the rooms of your home, you often use curtains , which always manage to give brightness and color to the interior spaces. Clearly there are different types of curtains to choose based on the room. Just think, for example, of Venetian blinds, but also panel curtains, up to Roman blinds and glass curtains. Another very popular and sought-after type on the market is undoubtedly that of roller blinds , in particular for their ability to shield the light that enters through the windows. In roller blinds, the fabric wraps around the metal roller, which also allows the curtain not to suffer creases.
Sewing a roller blind is simple: here’s how to do it
Roller blinds are often preferred because they take up much less space and allow you to add plant pots, decorations and other ornaments on the windowsills.Roller Blind – Imilanesi.Nanopress.it
However, many would prefer that roller blinds do not come into contact with the window , as in the winter months condensation could wet them and cause them to go mouldy.
That is why you can make roller blinds by hanging them on the outside of the window , in order to overcome this problem. The fabric in this case should be wider than the window opening and cover the slopes, so it is worth adding about 5-10 centimeters on both sides of the opening, depending on how much the windowsill protrudes.
The most important detail is obviously the lifting mechanism . You need to use two ropes, where tassels are attached at the bottom, which always give a certain elegance.
As for the fabric, the choice depends on your taste, although it is advisable to avoid fabrics that are too elastic . The fabric chosen must wrap easily around the frame and protect well from light.
If you recover a curtain directly, the fabric will already appear hemmed. If instead we have recovered a normal fabric we will have to proceed with the folding on the reverse and consequently with the sewing. Subsequently, during the cutting, we must add the seam allowances to the width.
To attach the top of the canvas to the gutter, you need to make a drawstring . Fold the edge to the wrong side by a centimeter and then fold it again, sewing along the edge of the curve, as you can see in the video.
The width must be calculated carefully , so as to allow a perfect adaptation of the tube and avoid the fabric from twisting.
Homemade Roller Blinds: A Quick and Easy Solution
Once everything is complete, you can start to insert the tube into the passage that we have just created. Wrap the fabric around the tube and insert a window glass stop (possibly one or two centimeters shorter than the width of the curtain) into the lower pocket.Installing Roller Blinds – Imilanesi.Nanopress.it
Once this step is completed, thread the ropes through the end holes of the gutter and tie a nice knot. The cable should be wrapped around one side of the pipe, also adding caps to the sides of the gutter to prevent the wrapping from flying away.
Of course, above the window, on both sides, we will have to screw some fixing elements to facilitate the roller blind mechanism. These are two arches connected by bolts that are easily found in specialty stores.
All that remains is to insert the tube where we have rolled up the curtain and close it with the second arch, fixing it, even if not completely. In this way the tube will be able to turn easily . Let’s try: if the roller blind comes down (and goes up) without problems, the game is done.