Do you need to join two pipes and don’t know how to do it? You don’t need an adapter, there are other methods to do it effortlessly. Here are 4 foolproof tricks to connect two pipes without using an adapter!methods for joining pipes-Imilanesi.it
Connecting two pipes without using the adapter is easy, just use one of the many effective and easy to perform methods to achieve this goal. Here are 4 tricks to connect two pipes and without using the adapter, thus saving a lot of money!
First trick to join two pipes
The first trick to connect two pipes without an adapter involves the use of wire cutters , here’s how to do it:
- Using wire cutters, cut the tube in half;
- Cut a piece of pipe in half again;
- Use the hair dryer to blow hot air onto the end of a piece of pipe;
- While it is still soft, insert the other piece of tube inside;
- Slide the one where you used the hairdryer for a few centimetres;
- You can stop when you notice that it is well fitted;
- When it hardens, remove it and apply some glue to the end;
- Put the tube back, let it dry, then cut it in the center of the joint;
- Repeat the operation on the other side of the tube and then cut;
- Finally, file the ends on the sandpaper.
Seal the ends of the pipes with a piece of wire . The adapter to join two pipes is ready, you can insert them from both sides and they are ready to use.How to join two or more pipes in the right way – Imilanesi.Nanopress.it
Second trick
This second trick involves joining two ends of a garden hose. The two ends are the same so you need a piece of hose to join them . Here’s how to do it:
- Take a steel round screw joint;
- Heat it over high heat;
- Pick it up with tongs and place it on a suitable surface;
- While it is still hot, insert a piece of 3/4 plastic tubing;
- Place the piece of vine in water to cool it;
- When it is cold, unscrew the bolt from the plastic tube with the pliers;
- The tube will have the same grooves at the end as the bolt;
- Heat the bolt again and repeat with the other end of the tube.
At this point cut the piece that comes out of the groove , put some gaskets on the ends of the irrigation pipes and screw the piece of pipe on both. The water will not come out and the connection will be perfect.
Third trick to join two pipes
Is your irrigation pipe leaking because there is a hole? Here is the solution to get it working again and avoid buying another one . Here is what to do:
- Cut the pipe at the leak point;
- Cut a small piece of rigid tubing the size of your irrigation pipe;
- Apply some clear glue and insert the rigid piece into the irrigation pipe;
- Do the same thing with the other side;
- Seal both ends with a plastic tie and pull the closure firmly;
- Cut off the excess parts.
The irrigation pipe is ready to work again without the risk of water leaking out.The connection to join the pipes can be made at home: it takes little – Imilanesi.Nanopress.it
Fourth trick
If the irrigation pipe is leaking water because it is cracked, you can solve the problem in this way: Cut the pipe where the crack is from which the water is leaking;
- Insert a small piece of plastic into the two ends to join the two sides;
- On the outside, screw on the two pieces supplied in the package, each with two screws;
- Screw both together tightly until the inserted piece feels secure.
You have now joined the two parts of the irrigation pipe and the water will no longer leak. You will be able to use the pipe to irrigate without problems and as you can see you have repaired the pipe without purchasing the adapter .
With these 4 tricks you can connect any pipe easily and in a few minutes, saving the purchase of the adapter and therefore without spending more money. You can choose one of the tricks described depending on the pipe you need to join.